Hardwood refinishing & sanding in Kaufman, TX

Usually, yes. We measure the height difference at each doorway first, then decide between building up the low side with self-leveling compound, using a purpose-made reducer, or feathering the transition across a wider run. On additions with more than about an inch of difference we'll say so up front, because that changes the price and the schedule more than the flooring choice does.

It's common in Kaufman houses from the 1960s and 70s and it needs handling properly, not scraping in a hurry. Depending on what's underneath, the right answer is mechanical removal or a proper encapsulation layer before the new floor. We'll look at it during the free estimate so it's priced in from the start rather than turning up as a surprise mid-job.

Yes. We offer financing through Synchrony and Wisetack, so a whole-house floor doesn't have to be paid in one lump. We'll bring samples to the house, measure, and give you a written estimate for free, no charge whether or not you go ahead. Once you decide, we can usually be starting within about two days.

You can, but the seam will show. The same species from the same era darkens at a different rate depending on light, and a fresh finish beside a fifteen-year-old one reads as new against old no matter how the stain is matched. Where a room closes off with a door, we stop cleanly at a threshold. Across an open plan, do the whole field.

Most families stay. With a waterborne finish the odor is mild and clears quickly, and we sequence the work so there is a path to a bedroom and a bathroom. Oil-modified finish is a different story: the smell is strong for several days, and households with infants or birds usually leave. Pets have to be out of the work area entirely, since paw prints in a curing finish are permanent.

Yes, within what the species allows. Red oak carries a pink undertone that fights gray stains, maple and birch blotch unless they are conditioned or water-popped first, and no stain makes a floor lighter than its own bare wood. We sand a section of your floor and lay candidate stains on it, because a sample board of someone else's oak tells you very little.